textilecoach
Dec 12, 20211 min
Updated: Dec 22, 2023
It is defined as the process of maintaining the quality of raw materials used during the production of the finished product is known as inspection.
In this system, one should inspect at least 10% of the total rolls in the shipment. Make sure that at least one roll from each color needs to be inspected.
Note: a maximum of 4 points should be charged to one linear yard. Also, note that only “major” defects are charged.
The acceptable score varies. Many countries use 40 points per 100 yards as an acceptable defect rate. However, many find this is not acceptable.
In 4 point system, fabric quality is evaluated by unit points/100 sq. yds.
Points / 100 sq. yd. = (Total points in roll * 36 * 100)/ (Fabric length in yards * Fabric width in inches)
Normally fabric rolls containing 40 points per 100 square yards are acceptable.
Example: A fabric roll of 135 yards long and 58 inches wide containing the following defects
Therefore,
Points / 100 sq. yd. = (30 x 36 x 100) / (135 x 58)
= 13.79 points
So, defect is accepted.
Can you help us improve this page?
Send us your contribution at info@textilecoach.net,
we will update this page and give you proper attribution!